pocketPANO COMPACT

The camera specific nodal point adapter especially for your compact camera.

Please take a look at the compatibility information for accessories!

All details about the pocketPANO COMPACT can be found here...

For Canon Cameras

pocketPANO COMPACT nodal head for Canon G7 X Mark II

including soft storage bag

pocketPANO COMPACT nodal head for Canon G7 X Mark II

79,90 €

  • verfügbar | available
  • 1 - 3 Tage Lieferzeit | 1 - 3 days delivery time

For Fujifilm Cameras

pocketPANO COMPACT nodal head for Fujifilm X100F

including soft storage bag

pocketPANO COMPACT nodal head for Fujifilm X100F

79,90 €

  • verfügbar | available
  • 1 - 3 Tage Lieferzeit | 1 - 3 days delivery time

For Nikon Cameras

pocketPANO COMPACT nodal head for Nikon Coolpix A

including soft storage bag

pocketPANO COMPACT nodal head for Nikon Coolpix A

79,90 €

  • verfügbar | available
  • 1 - 3 Tage Lieferzeit | 1 - 3 days delivery time

For RICOH Cameras

pocketPANO COMPACT nodal head for RICOH GR II

including soft storage bag

pocketPANO COMPACT nodal head for RICOH GR II

79,90 €

  • verfügbar | available
  • 1 - 3 Tage Lieferzeit | 1 - 3 days delivery time

For Sony Cameras

pocketPANO COMPACT nodal head for Sony RX100 (I)

including soft storage bag

pocketPANO COMPACT nodal head for Sony RX100 (I)

79,90 €

  • verfügbar | available
  • 1 - 3 Tage Lieferzeit | 1 - 3 days delivery time

pocketPANO COMPACT nodal head for Sony RX100 II

including soft storage bag

Currently sold out! Since the pocketPANO for the RX100 II is the least requested model, we ask for a short notice if interested.

pocketPANO COMPACT nodal head for Sony RX100 II

79,90 €

  • leider ausverkauft | out of stock

pocketPANO COMPACT nodal head for Sony RX100 III / IV / V

The housing and lens of the RX100 III / IV / V are identical.

including soft storage bag

pocketPANO COMPACT nodal head for Sony RX100 III / IV / V

79,90 €

  • verfügbar | available
  • 1 - 3 Tage Lieferzeit | 1 - 3 days delivery time

threaded adapter 1/4" - 3/8" UNC

If you want to mount your pocketPANO COMPACT (or any accessory with 1/4" connection thread) directly on a tripod with the large photo thread (3/8" UNC), you can buy the matching adapter here. Also made from the robust material HPL, thus perfectly matching the pocketPANO COMPACT nodal head. With a handy profile, a 1/4" external thread (steel set screw) and 3/8" internal thread. No rubber pad elements are integrated, as this leads to an elastic construction and reduces the stability. The HPL eliminates the risk of scratching the tripod or the streaked parts.

Of course it is also suitable for any other purposes where such an adapter is needed. Due to different load situations (leverage) it is difficult to specify a maximum weight load. For a large SLR with telephoto lens and high leverage, the adapter is certainly not suitable.

Note: This thread adapter is not required for the pocketPANO VARIO.

Threaded Adapter 1/4" - 3/8" UNC

Diameter: 40mm, Thickness: 13mm, Weight: 22g, Length of 1/4" set screw: 4.8mm, Depth of 3/8" Thread: 8mm (this means that the 3/8" threaded bolt of your tripod should not be longer than 8mm!)
Threaded Adapter 1/4" - 3/8"

9,90 €

  • verfügbar | available
  • 1 - 3 Tage Lieferzeit | 1 - 3 days delivery time

Sony RX100 mit zusätzlichem Handgriff; markierter Bereich für die Beabeitung zur Nutzung mit dem pocketPANO Nodalpunktadapter

Note:

The pocketPANO COMPACT nodal point adapters are only intended for use with the respective camera model in its original condition. If you have added additional accessories, it may not be possible to use the nodal point adapter easily. This can e.g. with additional handles, adapter plates, filter threads, step-up / step-down rings or the like. For example, There are some users of the Sony RX100 who have stuck an extra rubber handle on the front of the camera to better hold the camera. This means the camera can no longer be attached to the pocketPANO. But there is a simple solution: the handle can be detached again and easily edited with a craft knife. To do this you just need to cut a small piece as sketched in the picture (along the red line). After that, the handle can be easily glued on and the camera can be used on the pocketPANO.

If you have an additional filter thread attached to your camera, it is important for trouble-free use of the pocketPANO that this filter mount does not exceed a certain size. You can check this by placing the camera on a flat surface (such as a table surface). The additional filter holder must then have a minimum distance to the table surface of about 3-4mm! If the diameter of the filter holder is larger, it will collide with the pocketPANO nodal point adapter when the camera is mounted, and the camera may be damaged.

Just write us a message if you are not sure!

 

For cameras with folding display, you can also expand the display during use with the pocketPANO nodal point adapter. This makes work easier in confined situations.
Basically, we always try to customize the design of the camera-specific adapters so that all functions of the camera are preserved. Should there be any restrictions, it is of course noted in the product description.
P.S .: Screen Protectors or glasses pose no problem!


All mentioned brand names and logos are the property of the respective copyright holder and are only used for the purpose of unambiguous product allocation. On this page no original products of the mentioned brands are offered. These brands are only mentioned in order to be able to assign our accessory products to a specific product.